101-DE Wall Mount Delayed Egress Controller

101-DE Wall Mount Delayed Egress Controller

101-DE Wall Mount Delayed Egress Controller

All delayed egress logic, annunciation, keypad, and optional keyswitch control are located in an easy to reach flush or surface wall mounted box located adjacent to the door. Wall Mount Controller provides convenient reset and control functions with status indicator.

Field Selectable Manual or Automatic Power Up. The SDC Exit Check® is one of the few delayed egress units to provide a field selectable manual power up feature on all locks to comply with UBC and State of California Building Code requirements. Choice of Activations Trigger, activated by integrated door movement sensor, mechanical exit device with switch, monitoring strike or exit sensor bar. The 1500DEV Emlocks feature interlocking EZ Mount Lock Assembly, just attach and secure with captive screws.

Compatible with standard magnetic locks only when used with an exit sense bar or exit bar equiped with a request-to-exit switch. Options: Door Status Sensor; Magnetic Bond Sensor.

Filler Plates & Angle Brackets for SDC 1500 Series Emlocks
Delayed Egress Remote Controls & Annunciators.

101-DE Wall mount controller with keypad control and reset, 180 mA @ 12/24 VDC.


101-KDE Wall mount controller with keypad & keyswitch control and reset, 180 mA @ 12/24 VDC.


1511DEV Single magnetic lock with activation sensor, 1650 lbs holding force, 670/350 ma @12/24VDC, specify 2 for pair of doors.


1571DEV Single magnetic lock with activation sensor, 1200 lbs holding force, 250/125 ma @12/24VDC, specify 2 for pair of doors.


1581DEV Single magnetic lock with activation sensor, 650 lbs holding force, 440/220 ma @12/24VDC, specify 2 for pair of doors.


1575DEU Outdoor/indoor single magnetic lock with activation sensor and conduit fitting, 1200 lbs holding force, 250/125 ma @12/24VDC, 630 stainless steel finish, specify 2 for pair of doors.


1576DEUOutdoor/indoor face drilled single magnetic lock with activation sensor and conduit fitting, 1200 lbs holding force, 250/125 ma @12/24VDC, 630 stainless steel finish, specify 2 for pair of doors.


 
Features
  • Activation by door movement or exit bar
  • Locked & egress mode status outputs
  • Adj. timed bypass 1-30 sec.
  • Keypad reset, sustained bypass & timed bypass.
  • Optional mortise keyswitch control (101-KDE)
  • UBC & California compliant manual power up
  • Auto sensing 12/24VDC voltage Input
  • UL, CSFM, MEA Listed
  • 3 Gang Controller, Surface Box Optional