SDC's Auto EntryControl™ Swing Door Operator provides hands-free, low-power, point of entry door control with safe and reliable, electro-mechanical drive and slim-line design. The state-of-the-art microprocessor-based unit is self-tuning and self-learning while offering non-handed operation, full mechanical stops and a variety of interface options for sensors, push-plates, fire alarms and electrified locks.

AUTO136V PUSH Operator for 36” Door Opening, Aluminum


AUTO136X PUSH Operator for 36” Door Opening,
Dark Bronze Powder Coat


AUTO236V PULL Operator for 36” Door Opening, Aluminum


AUTO236X PULL Operator for 36” Door Opening,
Dark Bronze Powder Coat


AUTO336V PUSH & PULL Arms with 20mm & 35mm Spindles, One Motor Assembly, Aluminum


AUTO336X PUSH & PULL Arms with 20mm & 35mm Spindles, One Motor Assembly, Dark Bronze Powder Coast


Also available for 42" and 48” Door Openings
AUTO-KS Single Gang key lock switch

AUTO-KSN Narrow key lock switch

AUTO-RKR Narrow rocker switch


Features

Auto EntryControl’s™ non-pivot drive and combination of belt, gear and pulley requires less torque, requires less power, absorbs more abuse, and is quieter than other automatic door openers while complying with all US and Canadian ADA requirements. On-board diagnostics simplifies troubleshooting for ease of installation and all Auto EntryControl’s™ can be easily configured for surface mounted push/pull or overhead concealed applications.

  • ADA Compliant
  • Complies with ANSI A 156.19
  • UL - Certifed for use as fire door operators (3 hour rating)
  • Self-Tuning, Self-Learning
  • Minimum 5 seconds from close to open
  • Stays open for 5 seconds
  • Force: 15 lbs -6.8 kg
  • Push or Pull (In door, Out swing)
  • Activation: Knowing Act
  • Optional Safety Device
  • Power: 1A, 100W
  • Non-Handed
  • Extremely Quiet Operation