Door Control Modules

Door control relay modules ensure compatibility of access hardware components and simplify system installation and troubleshooting. Different modules may be specified for one power supply.

The isolated relay design allows small gauge cable runs of 22 gauge wire up to 1000 feet from the trigger device to the module.

Programmable Door Controllers
Two and four station microprocessor based controllers with up to seven different field selectable modes. Programmable controllers may be installed in SDC power supplies, or individual controllers may be installed in remotely located junction boxes. Access Control Power Supplies – 1 Amp, 1.5 Amp, 2 Amp, 4 Amp, and 6 Amp powers supplies for failsafe and failsecure access control applications.

FB-4 Module, 4 Fused Outputs

CR4 Module, Control Relays, (4) NO Inputs, (4) Fused SPDT Outputs, (4) SPDT Dry Contact, 5 Amp

UR-1 Universal Relay Module

ACM-1 Module, Control Relay, (4) NO, (4) NC Entry/REX Inputs, (1) SPDT Wet Output, (1) SPDT Dry Contact

EMC Electric Retraction Sequencer

PB-8 Module, Power Booster, (1) NO Input, (1) SPDT Output, 8 Amp Inrush, 1 Amp Continuous

PB-16 Module, Power Booster, (1) NO Input, (1) SPDT Output, 16 Amp Inrush, 1 Amp Continuous